Pixelink Support

Advanced Mode

Advanced Mode

Basic Controls Tab
The following is an overview of the Basic Controls tab of Capture OEM. Camera Select The camera select drop down allows you to select the camera y...
Thu, 30 May, 2019 at 11:49 AM
Region of Interest Tab
The Region of Interest tab controls the size of the image being captured and its location with respect to the entire image array. ROI Size and L...
Thu, 30 May, 2019 at 1:22 PM
Lens Tab
The following is an overview of the Lens tab of Capture OEM. Sharpness Score - Region of Interest A set of control information the camera uses ...
Mon, 27 Aug, 2018 at 5:01 PM
LUT & FFC Tab - Capture OEM
The Lookup table (LUT) control provides a simple way to manipulate the grey scale image data coming from the camera via a simple lookup table.  The Flat Fie...
Thu, 30 May, 2019 at 2:03 PM
Lookup Table
The Lookup table (LUT) translates each pixel value from the camera through a programmable user-defined transfer function. For a sensor with a bit depth of 1...
Thu, 30 May, 2019 at 2:20 PM
How to set up a Lookup Table
The Lookup table (LUT) translates each pixel value from the camera through a programmable user-defined transfer function. The graph provided beside the Look...
Thu, 30 May, 2019 at 3:00 PM
Image Capture Tab
The "Image Capture" tab can be used to capture images in different ways i.e., one at a time, automated using a "trigger", and elapsed ti...
Thu, 30 May, 2019 at 3:08 PM
Video Capture Tab
The following is an overview of the Video Capture tab of Capture OEM: Clip Capture Click on the Number of Frames box provided in "...
Thu, 30 May, 2019 at 4:03 PM
H.264 Video Encoding in Capture OEM
An uncompressed video contains all of the data received by the sensor, but as a result it requires a high bitrate and quickly fills up storage space. Uncomp...
Fri, 31 May, 2019 at 2:33 PM
External Control Tab
The External Control tab allows the user to control external devices connected to the camera, such as triggers or strobes. Trigger The snapshot...
Fri, 31 May, 2019 at 2:47 PM