Trigger and GPOs - PL-D700 Series
Trigger and GPOs - PL-D700 Series
PL-D enclosed cameras with a Machine Vision interface provide hardware Trigger and GPIO capability. The mating connector is an 8-pin Hirose HR25A-7P-8P cabl...
Mon, 24 Oct, 2022 at 2:41 PM
PL-D board-level cameras provide a GPIO interface through an 8-pin 1.25mm Molex connector and a powered I2C interface through a 6-pin 1mm JST connector loca...
Mon, 20 Mar, 2023 at 10:29 AM
The optically isolated trigger input can accept a floating current source which is not referenced to the camera ground. Alternatively, a ground referenced ...
Mon, 24 Jun, 2019 at 3:12 PM
There are several synchronization methods that can be used to synchronize multiple cameras. They are Synchronized Master-Slave Software/Hardware Trigger...
Fri, 21 Aug, 2020 at 4:48 PM
The PL-D cameras that use Sony IMX sensors (PL-D752, PL-D753, PL-D755, PL-D755MU-POL, PL-D757, PL-D797, PL-D759, PL-D7512, PL-D795, PL-D799, and PL-D7912) a...
Mon, 1 Apr, 2019 at 1:09 PM
Sony sensors support Sequential Trigger mode. In other words, they can be triggered with sequential hardware trigger pulses. In order to achieve the maximum...
Thu, 15 Oct, 2020 at 11:34 AM
Pixelink's PL-D729 camera does not support any Trigger functionality. This camera model supports only camera GPO modes 1 and 2, which is the Normal mo...
Thu, 15 Oct, 2020 at 11:17 AM
The Timing Diagrams for several PL-D cameras are available below. For the PL-D721, PL-D722 or PL-D725, download PL-D720 Timing.pdf For the PL-...
Mon, 8 Aug, 2022 at 1:19 PM
The PL-D720 series are global shutter cameras that allow overlapped exposure of one frame while reading out another. Thus, the maximum frame rate is determ...
Tue, 17 Dec, 2019 at 1:08 PM
The PL-D732/734 series are global shutter cameras that allow overlapped exposure of one frame while reading out another. Thus, the maximum frame rate is de...
Mon, 24 Jun, 2019 at 4:11 PM