Pixelink Support

captureOEM for Linux

Controls Tab - captureOEM for Linux
The following is an overview of the Controls tab of captureOEM. Camera Select The camera select drop down allows you to select the camera you are ...
Thu, 13 Sep, 2018 at 1:42 PM
Stream Tab - captureOEM for Linux
The following is an overview of the Stream tab of captureOEM: Region of Interest (ROI) The Region of Interest (ROI) is the area of the sensor b...
Thu, 13 Sep, 2018 at 12:16 PM
Image Tab - captureOEM for Linux
The Image tab can be used to capture and save images.  Capturing an Image At any time you can click on "Capture" to capture an image ...
Mon, 27 Aug, 2018 at 11:15 AM
Video Tab - captureOEM for Linux
The following is an overview of the Video tab of captureOEM: Choose Video Name, Location and Type Location can be selected from the...
Mon, 27 Aug, 2018 at 11:52 AM
GPIO Tab - captureOEM for Linux
The GPIO tab allows the user to control external devices connected to the camera, such as triggers or strobes. Trigger The image below shows...
Wed, 12 Sep, 2018 at 10:47 AM
Lens Tab - captureOEM for Linux
The following is an overview of the Lens tab of captureOEM: Sharpness Score - Region of Interest A set of control information the camera uses t...
Thu, 13 Sep, 2018 at 3:58 PM
Filter Tab - captureOEM for Linux
The following is an overview of the Filter tab of captureOEM.  captureOEM includes Preview Filters, which can be selected from the drop down menu. ...
Tue, 28 Aug, 2018 at 3:57 PM
Link Tab - captureOEM for Linux
The following is an overview of the Link tab of captureOEM. Bandwidth Limit (Mbps) When enabled, this feature will place an upper bound on the...
Tue, 28 Aug, 2018 at 4:18 PM
Auto ROI tab - captureOEM for Linux
The following is an overview of the Auto ROI tab of Capture OEM: On some cameras models, the auto operations for exposure, white balance and gain w...
Thu, 13 Sep, 2018 at 12:17 PM
Info Tab - captureOEM for Linux
The following is an overview of the Info tab of captureOEM. Camera Load Settings / Save Settings Select Load Settings to feature settings ...
Thu, 13 Sep, 2018 at 3:42 PM