Trigger and GPOs - PL-A700 Series
Trigger and GPOs - PL-A700 Series
Debounce Delay The debounce delay allows for non-TTL signals (slow and/or noisy edges) to be used in the trigger input. The delay can be adjusted using th...
Mon, 24 Jun, 2019 at 2:09 PM
Hardware Trigger Mode 0 Notes: 1. "ON" refers to current flowing through the optocoupler and "OFF" refers to no curr...
Mon, 24 Jun, 2019 at 2:11 PM
Board level cameras with an EMV (Extended Machine Vision) interface on an 8-pin, 1.25mm header connector provide 3.3V TTL-level connections for one external...
Mon, 24 Jun, 2019 at 2:46 PM
Enclosed Cameras The GPO pins are open-collector current sink outputs. The GPOs can handle a maximum of 15mA and 40V with respect to ground. To use them ...
Mon, 24 Jun, 2019 at 2:39 PM
Enclosed cameras with an MV (Machine Vision) interface on a 6-pin round Hirose connector provide optically-isolated connections for one external trigger and...
Thu, 6 Feb, 2020 at 1:53 PM
The trigger inputs can accept floating signals that are not tied to the camera ground. To use an analog trigger switch that connects to ground when a trigg...
Mon, 24 Jun, 2019 at 2:34 PM