Hardware Trigger Mode 0






Notes:

1. "ON" refers to current flowing through the optocoupler and  "OFF" refers to no current flowing through the optocoupler.   Refer to interface schematics.

2. For minimum hardware trigger, the programmable trigger (t6) should be set to 0 (minimum).  For a software trigger, t7 = 1.7 ms typical


Notes:

1. "ON" refers to current flowing through the optocoupler and  "OFF" refers to no current flowing through the optocoupler.   Refer to interface schematics.

2. For minimum hardware trigger, the programmable trigger (t6) should be set to 0 (minimum).  For a software trigger, t7 = 1.7 ms typical


The 740 and 780 timing tables can be downloaded below.