Trigger and GPOs - PL-X900 Series
Trigger and GPOs - PL-X900 Series
PL-X enclosed cameras with a Machine Vision interface provide hardware Trigger and GPIO capability. The mating connector is an 12-pin Hirose HR25A-9P-12P ca...
Tue, 30 Jan, 2024 at 2:13 PM
PL-X board-level cameras provide a GPIO interface through an 8-pin 1.25mm Molex connector and a powered I2C interface through a 6-pin 1mm JST connector loca...
Tue, 30 Jan, 2024 at 2:14 PM
The optically isolated trigger input can accept a floating current source which is not referenced to the camera ground. Alternatively, a ground referenced c...
Fri, 21 May, 2021 at 11:27 AM
The Timing Diagram for PL-X cameras are available below. For the PL-X957, PL-X9512, PL-X9520, or PL-X9524, download PL-X Sony Sensor Timing Diagram.pd...
Wed, 26 Apr, 2023 at 9:20 AM
The readout timing for PL-X cameras with Sony sensors varies, depending on the camera, its selected mode of operation, and bit output. Normal Operating ...
Wed, 26 Apr, 2023 at 9:03 AM