The following is an overview of the Lighting tab of Capture OEM.
Lighting Controller Select
By default, when one camera and one Navitar Lighting Controller are attached to the host computer, the camera and lighting controller will automatically pair with one another. If multiple cameras or multiple control boards are attached to the host computer, the camera and control boards must be manually paired. To select what control board you wish to control with the current camera, select the desired control board from the Lighting Controller Select drop-down menu.
Click the checkbox to activate or deactivate brightness control. When enabled, the brightness of the light source can be adjusted through Capture OEM by using the slider, or by manually entering a value into the text box.
The voltage, temperature and current of the light source are shown under the slider. These values will automatically update when changing the brightness of the light source via the slider or text box, or they can be updated manually by clicking the 'Update" button.