Pixelink
Support

FAQ

FAQ

Image Transfer Fails to Start when Image Size is Bigger than 2 MB
Cause: The USBFS buffer size is too small (16 MB by default). The following command can be used to check usbfs_memory_mb size.  cat /sys/module/usb...
Wed, 8 Jun, 2016 at 12:52 PM
Camera is Detected but Cannot Stream
Cause: The USB3 bus power provided by the ARM board is not sufficient to power the camera. Solution: Power the USB3 camera using a powered USB3.0 hub.
Thu, 22 Mar, 2018 at 5:05 PM