Supported by ...
No longer supported.
This feature can be used to slow down the camera's imaging rate (frame rate), by user specified factor. This has the effect of reducing the camera's allowable frame rates by this factor. This feature is most useful if your computer is not able to process all of the frames (due to resource limitations within the computer) being sent from a camera operating at even its lowest frame rate setting.
Setting this Imager Clock Divisor to 1 has the same effect as disabling the feature.
|Feature ID||Number of |
|1||fValue||N/A||Integer only |
(must be a power of 2)
Note: The stream state must be off (STREAM_OFF) to modify this feature. See PxLSetStreamState.
|Camera||Presence||Read Only||Auto||Off||Manual||One-time Auto||CID|
|fValue||None||Absolute||1||2||1||Power of 2||This is a clock reduction factor|