Pro-E 3D models
**Please note these are the only 3D models we have for enclosed cameras**
Mounting from the Bottom
There are four M3 threaded holes on the bottom of the camera. These holes can be used to attach the camera to an optional ¼-20 thread mounting plate (available from your Pixelink vendor) or to mount the camera to a custom fixture. The mounting hole pattern is the same relative to the C-Mount on all 700 and 900 series cameras.
Mounting from the Front
There are also four M3 threaded holes surrounding the C-mount on the front of the camera. These holes can be used to mount the camera to a custom fixture. The pattern of the holes is the same relative to the C-mount on all 700 and 900 series cameras.