Enclosed Cameras


ESD – Pixelink enclosed cameras are not ESD sensitive and can be handled without ESD protection.


Water & Dust – The enclosures are not water or dust proof. If used in harsh environments, the camera should be protected within an appropriate enclosure.


Caution

Do not open camera housing


Cleaning


Housing: Clean the housing with a cloth dampened (not dripping) with reagent-grade isopropyl alcohol.


Glass:         

  • Carefully apply puffs of dry, compressed air to move particles off the center of the glass.

  • Remove oils with a swab moistened with reagent-grade isopropyl alcohol. The swab should be damp but not dripping.

  • For more information, see: Camera and sensor glass cleaning instructions

   

Caution

Do not use acetone to clean the glass

  


Board Level Cameras


ESD – The board level imaging modules are ESD sensitive and should only be handled by using proper ESD procedures. Refer to ANSI/ESD S20.20 Class Type 3 (4000 V).